Energy Series with Intellicore®

Models

Clopay's proprietary polyurethane Intellicore^® insulation
*Calculated door section R-value is in accordance with DASMA TDS-163
*Tested door U-factor is in accordance with DASMA 105.
**For sizes over 32'2" wide consult factory for specific configuration requirements.

Options

Glass Panel Options

24" X 8" (3715, 3717, 3718, 3720, 3724, 3730)	24" X 12" (3715, 3717, 3718, 3720, 3724, 3730)
Full-View* (3715, 3717, 3718, 3720, 3722, 3724)	19-1/2" x 12" (3721, 3723)

*Intellicore^® polyurethane insulated full-view sections available in models 3720, 3722 and 3724.

Glazing Material Options

Clear Glass

Gray Tinted Glass

Bronze Tinted Glass

Mirrored Glass*

Obscure Glass

White Laminate Glass*

Frosted Glass Or Acrylic

Clear Acrylic

Gray Acrylic

White Acrylic

Clear Polycarbonate

Bronze Polycarbonate

Aluminum Panel (Color Matched)

*Mirrored and laminate not available in 1/2"

Glass thickness available in 1/8", 1/4" and 1/2". Tri-wall polycarbonate thickness available in 1/2". Low-E available on insulated glass.

Color Options

Standard White

Chocolate

Almond

Desert Tan

Sandtone

Mocha Brown*

Charcoal

Bronze

Black

Gray

Trinar® White

Trinar® Beige

Commercial Tan

Premium finishing options include:

• Custom Colors with Color Blast ® Garage Door Paint System
• Bronze, dark bronze, black or custom color anodized finishing available on full-view sections only

Performance Options Available

Double-end hinge

3" track

High performance hardware features 10 gauge end hinges, heavy-duty top bracket and 3" sealed roller with 5/8" stem

Exhaust port can be cut into any type of solid sectional door. Available in select sizes.

WindCode^® reinforcement available up to W8 design pressure (DP) 52 PSF, depending on door configuration. Doors tested 50% greater than DP.

Upgrade your standard door with industrial-grade components.

25,000, 50,000 or 100,000 cycle springs available.

Speciality Options Available

Mullions
Carry-away, roll-away or swing-up mullions are available on select sizes.

Break-Away Section
Single section and double sections available on select sizes.

Pass Door
32" wide x 80" high, max 16'2" wide section. Available in 2" thick doors only.

ControlGard® SD Chain Hoist
The ControlGard® Chain Hoist features an integral braking system that only allows it to move when the user is actively pulling the chain, reducing the risk of expensive door damage and increasing the safety of users and those nearby.

Features & Benefits

Model 3730

Panel Design:	3" thick stucco embossed ribbed steel exterior
Steel Gauge:	27 gauge (.016" min) exterior; 28 gauge (.016" min) interior
Joint Design:	Tongue & groove section with continuous foam thermal break prevents cold or heat from passing through the section
Thermal Conductivity:	R-value 27.2* for maximum energy efficiency
Paint System:	3-stage paint process delivers maintenance free finish that resists rust prevention
Colors:	Snow mist white, commercial brown, ColorblastTM
Limited Warranty:	10-year paint / 10-year delamination / one-year material & workmanship

Model 3720 / 3724 / 3722

Panel Design:	(3720 & 3724) 2" thick stucco embossed steel exterior with minor ribbed pattern (3722) 2" thick stucco embossed flush steel exterior
Steel Gauge:	(3720) 27 gauge (.016" min) exterior; 28 gauge (.016" min) interior (3724) 24 gauge (.022" min) exterior; 28 gauge (.016" min) interior (3722) 20 gauge (.034" min) exterior; 28 gauge (.016" min) interior
Joint Design:	Tongue & groove section with continuous foam thermal break prevents cold or heat from passing through the section
Thermal Conductivity:	R-value 18.4* for maximum energy efficiency
Paint System:	3-stage paint process delivers maintenance free finish that resists rust perforation
Colors:	(3720) Standard white, glacier white, commercial tan, chocolate, mocha brown, gray, Trinar white, Trinar beige, charcoal and Color Blast™ (3724) Standard white, commercial tan, chocolate, black, gray, Trinar white and Colorblast™ (3722) Standard white, chocolate and Colorblast™
Limited Warranty:	10-year paint / 10-year delamination / one-year material & workmanship

MODEL 3717 / 3718

Panel Design:	(3717) 1 3/4" thick stucco embossed steel exterior with minor ribbed pattern (3718) 1 3/4" thick stucco embossed flush steel exterior
Steel Gauge:	27 gauge (.016" min) exterior; 28 gauge (.016" min) interior
Joint Design:	Tongue & groove section with continuous foam thermal break prevents cold or heat from passing through the section
Thermal Conductivity:	R-value 16.2* for maximum energy efficiency
Paint System:	3-stage paint process delivers maintenance free finish that resists rust perforation
Colors:	Pre-painted snow mist white, commercial brown, tan or gray. Optional Trinar white.
Limited Warranty:	10-year paint / 10-year delamination / one-year material & workmanship

MODEL 3715

Panel Design:	1 3/8" thick stucco embossed steel with minor ribbing
Steel Gauge:	27 gauge (.016" min) exterior; 28 gauge (.016" min) interior
Joint Design:	Tongue & groove section with continuous foam thermal break prevents cold or heat from passing through the section
Thermal Conductivity:	R-value 12.9* for maximum energy efficiency
Paint System:	3-stage paint process delivers maintenance free finish that resists rust perforation
Colors:	Pre-painted snow mist white or commercial brown, tan and gray
Limited Warranty:	10-year paint / 10-year delamination / one-year material & workmanship

*Calculated door section R-value is in accordance with DASMA TDS-163.

Specs/Drawings

Brochures

Brochure Model 3715 Brochure Model 3717-3718 Brochure Model 3720-3721-3723 Brochure Model 3722 Brochure Model 3724 Brochure Model 3730 Brochure Commercial Idea Book

Springs & Hardware

Commmercial Hardware

Commercial doors are designed with hardware to meet demanding applications of commercial building usage. All commercial doors are provided with the following hardware as standard. For additional upgraded hardware see “Options” tab.

• 14 gauge hinges
• Commercial 10 ball steel rollers with options for nylon tire rollers
• 10,000 cycle torsion springs
• Steel step plate and lift handle for easy operation
• Inside slide lock for increase security
• 19 gauge steel hinge support plates
• 18-gauge single end stiles; 16-gauge double end stiles
• Galvanized aircraft cables with 7:1 safety factory
• 2” or 3” track in a variety of configurations to meet building design requirements

Commercial Track Applications

In commercial settings, space utilization and space constraints are important factors in choosing the correct hardware configuration for your application. Clopay track offerings and options enable you to make the most efficient use of available space. Options include standard lift, low head room front or rear mount, follow the roof pitch, full vertical or combination of these options.  Learn more

Commercial Torsion Springs

Designed to counterbalance even the largest doors, commercial torsion spring assemblies can be designed for Industry standard 10,000 cycles or can be upgraded to 25,000, 50,000 or 100,000 expected life cycles. Click here for details