Garage Door Sizing Guide: Standard Dimensions and How to Measure

4 Min. Read

 

Most homeowners shopping for a new garage door know the old one needs to go, but they have no idea what size to even ask for. The vast majority of residential openings in the United States fall into a small handful of standard sizes. Knowing the standard dimensions for single-car and double doors, along with how to measure your own opening, means you'll have real numbers in hand before you place an order.

Standard Residential Garage Door Sizes

Residential garage door sizes are far more standardized than most homeowners expect, which means the right size for your home is likely already known, not something you have to guess at or custom-order.

The table below covers the standard garage door sizes for single-car and double openings.

Door Type Width Height
Single-car (standard) 8 feet 7 feet
Single-car (wider) 9 feet 7 feet
Single-car (custom territory) 10 feet 7 feet
Double (standard) 16 feet 7 feet
Double (larger vehicles) 18 feet 7 feet

These doors fall under ANSI/DASMA 102, the industry standard developed by the Door and Access Systems Manufacturers Association (DASMA) for sectional overhead-type doors. Manufacturers across the industry commonly build residential garage doors in standard sizes, which is why dimensions stay so consistent from brand to brand.

Single-Car Garage Door Dimensions

Single-car garage doors come in two common widths, both built to the same 7-foot standard door height. An 8-foot-wide by 7-foot-tall door is the standard door width for a single-car garage door, built to comfortably accommodate a typical sedan or compact SUV.

A 9-foot-wide by 7-foot-tall door has grown popular in newer construction, since the extra foot of width provides more comfortable clearance for wider vehicles and easier entry and exit. A 10-foot-wide option exists, but it starts to enter custom territory and may require special ordering.

Double Garage Door Dimensions

Double garage doors scale the same logic up for two vehicles. When builders frame a two-car garage, a 16x7 garage door, meaning 16 feet wide by 7 feet tall, is almost always the dimension they design around.

An 18-foot-wide version is growing in popularity, particularly for homes with larger vehicles or owners who park side-by-side SUVs. Both options share that same 7-foot garage door height, keeping hardware and installation largely consistent across sizes.

Should You Consider an 8-Foot Door Height?

Owners of oversized pickups, roof-rack-equipped SUVs or lifted trucks often find the extra clearance of an 8-foot door height worth the upgrade. Taller doors in the 9-foot to 10-foot range are also available for RVs or other specialty vehicles, though these typically require custom ordering rather than off-the-shelf installation. 

If your vehicle comfortably clears a standard 7-foot opening, there's no need to upgrade.

How to Measure for a New Garage Door

Standard garage door sizes are a great starting point, but the rough opening in your garage is what actually determines which size fits. The good news is that measuring is simple with a tape measure, and walking into a conversation with a dealer or installer armed with four specific numbers puts you in a much stronger position.

Local building codes reinforce how much this measurement matters. The City of Omaha's residential detached garage guide specifies door opening widths ranging from 6 feet to 18 feet, each with its own corresponding header requirements.

1. Measure the Rough Opening

The rough opening is the width and height of the framed garage door opening itself inside of the frame, not the existing door and not the exterior trim around it. Measure the full width and the height from floor to top. Your rough opening should match your door size. For example, a 9x7 door needs a rough opening measuring 9 feet wide by 7 feet tall, with little room for interpretation.

2. Measure Your Side Room

Side room refers to the clearance along each edge of the door frame, running from the frame to the nearest wall or obstruction. Installers rely on this space to correctly mount the vertical tracks and related hardware. Based on our experience with residential installations, standard track systems require side room next to the opening, while certain extension spring configurations require room to accommodate the hardware.

3. Measure Your Headroom

Headroom refers to the clearance from the top edge of the door opening to the ceiling or the lowest overhead obstruction. When the door rolls open, the horizontal track and spring hardware need this space to sit properly out of the way.

Minimum headroom requirements vary by spring system and are based on standard installation practice. Setups using extension springs generally need at least 10 inches of clearance, while torsion springs, the more common choice in residential garages, need about 12 inches.

Additional headroom is required if you plan to install a garage door opener, as the motor unit needs space above the track.

4. Measure Your Backroom and Opener Clearance

Backroom describes the open space behind the door opening, extending into the garage toward the back wall or the first ceiling obstruction. As the door lifts, the panels and tracks slide back and occupy this horizontal stretch.

Minimum backroom requirements vary depending on whether the door is operated manually or with an opener. For a manually operated door, plan on roughly 18 extra inches beyond the door's height, which means a 7-foot door calls for about 8 feet and 6 inches of open backroom. A garage door opener changes this calculation, since the opener rail and motor extend along the ceiling and require additional backroom beyond what the door panels need.

What if Your Opening Isn't Standard?

Plenty of garages fall outside the standard measurements covered above. For example, additions, renovations and older construction can leave you with an opening that falls between standard sizes or requires a custom-width door. If your opening doesn't match a standard size, a precise measurement is the fastest way to find out exactly what you need.

Get the Right Fit With AAA Garage Door

Knowing the standard dimensions is a great starting point, but every garage is a little different, and a fit that's off by even an inch can cause real problems down the road. AAA Garage Door has spent more than 25 years measuring and installing residential doors. We proudly serve areas across eastern Nebraska and western Iowa.  

Our team offers free estimates with on-site assessments to take the guesswork out of the equation. Contact our team to request a precise measurement and quote today. 

Ready to start exploring styles? Browse residential garage doors to compare the styles, materials and design options for your home.